Pairing the MEE Audio X6 (2nd Gen)


  1. Press and hold the Multifunction button for about 4 seconds until you hear the headset say “Pairing” and the light flashes red and blue.
  2. Open the Bluetooth menu on the device you wish to pair (usually located in Settings > Bluetooth). If needed, select “search for devices”, “add new device”, or “refresh”.
  3. Select “MEE audio X6” and allow pairing to complete.


Resetting the MEE Audio X6 (2nd Gen)


  1. To perform a full reset, first put the X6 in standby mode (headset is powered on but not connected to any devices).
  2. Make sure to turn off Bluetooth or delete the “MEE audio X6” pairing from any nearby devices that have previously been paired with the X6. 
  3. Once in standby mode, press and hold the Multifunction and volume up buttons simultaneously until you hear the headset say “Factory Reset Complete”. 
  4. All previously paired devices will be cleared from memory and a new pairing will need to be created before the X6 can be used.