Pairing the Sony - WF-SP800N
1. Remove both units of the headset from the charging case. The headset turns on automatically. Check that the indicators (blue) flash.
2. Enter pairing mode on this headset.
When you pair the headset with a device for the first time after purchase or after initializing the headset (if the headset has no pairing information), the headset enters pairing mode automatically if you remove the headset from the charging case. In this case, put the headset on both ears and proceed to step 3. When you pair a second or subsequent device (if the headset has pairing information for other devices), insert the headset units into both ears, then hold your fingers to the touch sensors on both the left and right units for about 7 seconds. When both units of the headset are worn, you will hear the voice guidance say, “Bluetooth pairing”, from the left unit.
3. Unlock the screen of the Android smartphone if it is locked.
4. Find the headset on the Android smartphone.
Resetting the Sony - WF-SP800N
1)Place the headset into the charging case, leave the lid of the charging case open, then hold your finger to the touch sensor on the left unit for about 20 seconds.
2)Release your finger when the indicator (red) of the headset turns off after flashing.
3)Hold your finger to the touch sensor on the right unit for about 20 seconds.
4)Release your finger when the indicator (red) of the headset turns off after flashing.